Fastmetrics Knowledge Base

Blog

  • Polycom 650 Reject Calls

    You can customize your Polycom SoundPoint 650 phone so that incoming calls from a particular party are immediately sent to your voice mail.

    Note – Rejecting calls is not available on shared lines.

    To send incoming calls from a particular contact directly to voice mail:

    • Press Directories.
    • Select Contact Directory.
    • Use Up Arrow and Down Arrow keys to scroll through the list to find the contact that you wish to direct calls directly to your voice mail. You can also use the * key to Page Up and the # key to Page Down.
    • Press the Edit soft key and scroll down to Auto Reject.
    • Use the Left Arrow and Right Arrow keys to select Enabled.
    • Press the Save or Cancel soft keys to accept or cancel changes.
    • Press Directories or the Exit soft key repeatedly to return to the idle display.

    Polycom SoundPOint 650 Reject Calls

  • Polycom 650 Navigation Keys

    To navigate through menus and to enter data, these are useful tips:

    Use Up Arrow and Down Arrow arrows to scroll through the lists.

    Press the * key to page up. Press the # key to page down. These shortcuts can be used when lists scroll down beyond a single page.

    When menus have submenus, use the Left Arrow and Right Arrow arrows to move one level down and one level up.

    Press Menu to exit from any menu.
    Press Directories to exit from any directory.

    To enter text using the dial pad, press the number keys one or more times.

    For example, for ‘A’ press ‘2’ and for ‘C’ press ‘222’. When in text entry mode, the title will show whether keys will generate numbers (1), upper-case (A), or lower-case (a) characters and the 1/A/a soft key can change this.

  • Polycom 650 Features

    Features of the Polycom SoundPoint IP 650 SIP phone

    Polycom SoundPoint 650 Features

    ID Name Description
    1 Message Waiting Indicator This will alert you to incoming calls, new messages, and other events.
    2 Up Arrow Down Arrow Left Arrow Right Arrow Use the arrow keys to scroll and navigate through the displayed information.
    2 Valid Key Use the select key to select the displayed information.
    2 Delete key Use the delete key to delete the displayed information.
    3 Directories Access local directories and call lists.
    3 Services Access special services (contact system administrator).
    3 Conference Setup a local conference.
    3 Transfer Transfer current call to third party.
    3 Redial Dial most recently dialed party.
    3 Menu Access local (your phone) and global (your organization) features.
    3 Messages Receive text and voice messages.
    3 Do Not Disturb Cancels ringing and directs incoming calls to your Voice Mail (if supported).
    4 Mute button Mutes audio transmission locally during calls.
    5 Headset button Allows you to place and receive calls through an optionally connected headset.
    6 Hands-free Microphone Place your phone on a hard, flat surface for best results.
    7 Speaker button Allows for hands-free communication during calls.
    8 Volume buttons Use these to adjust the volume of the handset, headset, speaker, and ringer.
    9 Dial Pad These 12 keys provide the 10 digits, the 26 alphabetic characters, and special characters available in context-sensitive applications.
    10 Soft Keys The screen will display labels for these keys, to identify their context-sensitive functions.
    11 Hold Holds an active call or resumes a held call.
    12 Speaker For ringer and hands-free audio output.
    13 Hookswitch
    14 Line/speed Dial Key Use these keys to activate up to six lines or speed dials that can be assigned to your phone.
    15 Line Indicators Individual multi-color LEDs display the dynamic call state and remote user status (busy lamp field (BLF) and presence). The mapping is:

    • Solid green—An active call is in progress.
    • Fast flashing green—There is an Incoming (ringing) call.
    • Flashing green—The call is on hold.
    • Solid red—The line is busy remotely (shared lines).
    16 Line key Use these keys to activate up to six lines or speed dials that can be assigned to your phone. The associated icons represent:

    • Line key 1 Registered line.
    • Line key 2 Registered shared line.
    • Line key 3 Unregistered line.
    • Line key 4 VoiceMail/Messages.
    • Line key 5 Speed-Dial.
    • Line key 6 Ringing.
    • Line key 7 Call Forward.
    • Line key 8 Do Not Disturb.
    • Line key 9 Conference.
    • Line key 11 Presence/BLF.
    • Line key 10 Ongoing call with HD Voice.
    17 Graphic Display Shows information about calls, messages, soft keys, time, date, and other relevant data. Caller display information—first party, second party, number of calls.

    Information display line (in order of precedence highest to lowest):

    • Popup text (like network errors).
    • Missed call text or second incoming caller display.
    • Do Not Disturb text.
    • Prompt text (like “Enter number”).
    • Time and date text (if idle display is not used for time/date display).

  • Polycom 650 Attaching the Base

    The base unit can be attached to the SoundPoint IP 650 in one of two ways:

    • Deskmount Method.
    • Wallmount Method.

    Deskmount Method

    Step 1: place all cords in the recessed area above the modular jacks.

    Polycom SoundPoint 650 Attaching Base 1

    Step 2: align the two protrusions on the bracket with their corresponding holes in the phone.

    Polycom SoundPoint 650 Attaching Base 2

    Step 3: snap them together to lock the base to the phone.

    Polycom SoundPoint 650 Attaching Base 3

    Wallmount Method

    Step 1: place all cords in the recessed area above the modular jacks.

    Step 2: on the back of the phone, remove the key located behind the hook switch and reposition it so that the end tab (at a 45 degree angle) is facing up.

    Polycom SoundPoint 650 Attaching Base 4

    Step 3: with mounting tab of the base unit facing up, fasten the base unit to the wall mount using wall anchors (not included).

    Note – The wall mount is not included in SoundPoint IP 650 SIP package. Contact your system administrator if you require one.

    Polycom SoundPoint 650 Attaching Base 5

  • Polycom 650 Connect Handset and Headset

    Connect the short straight end of the phone cord to the handset and the corresponding longer straight end of the cord to the handset jack on the back of the phone. Connect the headset (optional) to the headset jack on the back of the phone.

    Polycom SoundPoint 650 Connect Handset & Headset

  • Polycom 650 Connect Network & Power

    You have two options for network and power source connections for your Polycom SoundPoint IP 650. Your System Administrator will advise you on which one to use.

    You can use one of the following methods:

    • AC power.
    • Power over Ethernet (PoE).

    AC Power Option.

    Connect the supplied network cable between the LAN jack on the phone and the LAN port on the wall or hub/switch device port. Connect the DC plug on the power adapter to the DC 24V jack marked on the phone. Connect the country-specific AC cord to the power adapter.

    Polycom SoundPoint 650 Connect 1

    Power over Ethernet (PoE) Option.

    Using a regular CAT5 cable (optional accessory from Polycom), the phone can be powered from a PoE (IEEE 802.3af) compliant switch or hub.

    Polycom SoundPoint 650 Connect 2

    Need reliable internet service to support your IP phones?

    Fastmetrics provides a range of managed, reliable internet service connections to support and power your Polycom SoundStation 650 or IP phones.

    • Our team has more than two decades experience providing managed phone services to businesses of all sizes.
    • All Fastmetrics phone lines are provisioned over our private cloud voice network, for superior levels of Quality of Service (QoS).
    • Wide range of advanced business features included. No extra costs. Plus, seamless mobile presence via the free Fastmetrics Cloud Phone app.
    • Your choice of the latest Polycom VVX 310 or Yealink T42G handsets for FREE, for every phone user at your company.

  • Polycom 650 Parts List

    The following items are included in your SoundPoint IP 650 SIP package. Check this list before installation to ensure that you have received each item. If you are missing any items, please contact your system administrator.

    Polycom SoundPoint IP 650 SIP

    Polycom SoundPoint 650 Parts List 1

    Handset & Handset Cord

    Polycom SoundPoint 650 Parts List 2

    Network Cable

    Polycom SoundPoint 650 Parts List 3

    Power Adapter (specification varies according to country)

    Polycom SoundPoint 650 Parts List 4

    Note – the power adapter is not included in the Power over Ethernet (PoE) bundle package. Contact your system administrator if you require one.

    Phone Base

    Polycom SoundPoint 650 Parts List 5

    Quick Start Guide

    Polycom SoundPoint 650 Parts List 6

  • Polycom 335 Connect Network & Power

    Use Power over Ethernet (PoE) for network and power source connections to connect your Polycom SoundPoint IP 335 phone, unless otherwise directed by your System Administrator.

    The AC power adapter is a separate, optional accessory from Polycom. Your System Administrator will provide one if necessary.

    Power over Ethernet (PoE)

    Using a regular CAT5 cable (optional accessory from Polycom), the phone can be powered from a PoE (IEEE 802.3af) compliant switch or hub.

    Connect Polycom 335 using a PoE source.

    Plug the supplied network cable between the LAN jack on the phone and an available power and data port on the in-line power switch.

    Polycom SoundPoint 335 Connect network and Power Source

    Need reliable internet service to support your IP phones?

    Fastmetrics provides managed Internet options to support voice service over Polycom VVX or SoundPoint IP phones.

    • Our team has more than two decades experience providing managed voice service to businesses.
    • Fastmetrics voice is provisioned over our private network, for superior Quality of Service (QoS).
    • Range of advanced business features included. No extra costs.
    • Seamless presence via free apps and our browser based solution.
    • Choice of free Polycom VVX or Yealink phones for all users.

  • metricVOICE – Pop Out Contacts List

    How To Pop Out Your Contacts List

    In the bottom right of every menu (except the contacts menu) is a Contacts List popout that can be detached from your browser.

    Web Interface Pop Out Contacts 1

    If you click on the Popout Up Arrow it will expand the Popouts size.

    Web Interface Pop Out Contacts 2

    Clicking on the Popout Right Arrow will detach your contacts list from your browser and into it’s own browser window that will stay even if you close your main browser.

    Web Interface Pop Out Contacts 3

    The color of the light next to the person’s name tells you their status. Red means they are on a call, green means they are not on a call, and grey means their phone is not connected.

    Web Interface Pop Out Contacts 4

    You can also click on one of your contacts to use Click to Call if you have SIP Tapi installed.

    Web Interface Pop Out Contacts 5

  • metricVOICE – Checking Call History

    How To Check Your Call History

    This guide shows users how to check call history via the metricVOICE managed voice service. It uses the online portal. For more info on features and access to the online portal, check the metricVOICE basic user guide.

    More Quick Reference User Guides:

    Check quick guides on popular metricVOICE features.

    Click on the Call History menu.

    Web Interface Call History 1

    You will be able to see missed, incoming and outgoing calls.

    Web Interface Call History 2

    These are the symbols for missed, incoming and outgoing calls.

    Web Interface Call History 3

    You can Click to Call from the Call History menu.

    Web Interface Call History 4

    You can more forward or back in your log by using the page numbers.

    Web Interface Call History 5

    You can also Filter your call log with the filter button.

    Web Interface Call History 6

    You can filter your call history by date range, the phone number, and the type of call (incoming, outgoing, missed).

    Web Interface Call History 7