online technical support hub

Fastmetrics Knowledge Base

Polycom SoundPoint 650 – Attaching the Base

The base unit can be attached to the SoundPoint IP 650 in one of two ways:

  • Deskmount Method.
  • Wallmount Method.

Deskmount Method

Step 1: place all cords in the recessed area above the modular jacks.

Polycom SoundPoint 650 Attaching Base 1

Step 2: align the two protrusions on the bracket with their corresponding holes in the phone.

Polycom SoundPoint 650 Attaching Base 2

Step 3: snap them together to lock the base to the phone.

Polycom SoundPoint 650 Attaching Base 3

Wallmount Method

Step 1: place all cords in the recessed area above the modular jacks.

Step 2: on the back of the phone, remove the key located behind the hook switch and reposition it so that the end tab (at a 45 degree angle) is facing up.

Polycom SoundPoint 650 Attaching Base 4

Step 3: with mounting tab of the base unit facing up, fasten the base unit to the wall mount using wall anchors (not included).

Note – The wall mount is not included in SoundPoint IP 650 SIP package. Contact your system administrator if you require one.

Polycom SoundPoint 650 Attaching Base 5

Don't Monkey Around With A Costly & Old Business Phone System!