Fastmetrics Knowledge Base

Polycom SoundPoint 430 – Attaching the Base

The base unit can be attached to the SoundPoint IP 430 in one of two ways:

Deskmount Method

Step 1: place all cords in the recessed area above the modular jacks as shown.

Step 2: align the two protrusions on the bracket with their corresponding holes in the phone and snap them together to lock the base to the phone.

Wallmount Method

Step 1: place all cords in the recessed area above the modular jacks as shown in previous example. On the back of the phone, remove the key located behind the hookswitch.

Step 2: reposition it so that the end tab (at 45º angle) is facing up. This will ensure that the handset remains in place within the cradle in this position.

Step 3: with mounting tab of the base unit facing up, fasten the base unit to wall using wall anchors (not included).

Step 4: snap the SoundPoint® IP 430 into place.