The base unit can be attached to the SoundPoint IP 430 in one of two ways:
- Deskmount Method.
- Wallmount Method.
Step 1: place all cords in the recessed area above the modular jacks as shown.
Step 2: align the two protrusions on the bracket with their corresponding holes in the phone and snap them together to lock the base to the phone.
Step 1: place all cords in the recessed area above the modular jacks as shown in previous example. On the back of the phone, remove the key located behind the hookswitch.
Step 2: reposition it so that the end tab (at 45º angle) is facing up. This will ensure that the handset remains in place within the cradle in this position.
Step 3: with mounting tab of the base unit facing up, fasten the base unit to wall using wall anchors (not included).
Step 4: snap the SoundPoint® IP 430 into place.
Related Posts From Fastmetrics